Diving equipment

This filter allows you to soften the rendering of your photos made with some BIGBLUEDiveLights and allows the most creative people to propose unique renderings.

The yellow filter allows you to soften the colors of your photos. Model designed for AL1800XWP II, AL2600XWP II, HL450XW, HL1000XW and AL1200WP/XWP lamps.

The yellow filter allows you to soften the colors of your photos. Model designed for VTL3800P and VL10000P lamps.

This filter allows you to soften the rendering of your photos made with some BIGBLUEDiveLights and allows the most creative people to propose unique renderings.

This filter allows you to soften the rendering of your photos made with some BIGBLUEDiveLights and allows the most creative people to propose unique renderings.

Unlike UV light, blue light is not invisible to the human eye, so without a filter you will not be able to see the fluorescence because it will be overwhelmed by the ambient light.

This plate helps to bring out the fluorescence of corals and other underwater species: for all creative divers!

This adapter allows to fix an accessory (headlight, flash...) from a 25mm diameter Locline ball.

The 25 cm Flexible Photo Arm proposed by CARBONARM allows photographers and videographers divers an unequalled comfort.

Helmet for underwater caving. Compact, one-size-fits-all caving helmet.

It can be adjusted to any head size by means of internal PVC straps. It's very strong and light, and very compact in size. Numerous Carbonarm accessories can be applied to this helmet (e.g. clips, clamps, adapters) for easy use of lighting and action cameras. Thanks to internal PVC straps, all accessory fastening screws are not in contact with the head and do not get in the way during use.

Compact, one-size-fits-all caving helmet.

It can be adjusted to any head size by means of internal PVC straps. It's very strong and light, and very compact in size. Numerous Carbonarm accessories can be applied to this helmet (e.g. clips, clamps, adapters) for easy use of lighting and action cameras. Thanks to internal PVC straps, all accessory fastening screws are not in contact with the head and do not get in the way during use.

The Battery for the VL18000, CB16500 & TL8000 from BIGBLUEDiveLights will be very useful for your travels but also if you are used to make several dives in the same day.

Mask cover to simulate zero visibility exercises underwater or to protect your mask during transport.

Very useful during Sidemount diving, to keep the tanks in place and maintain comfort during the effort.

The blades of the Eezycut are made of stainless steel. This steel offers a good resistance to humidity, but especially in sea water, the blades can rust! Do not hesitate to rinse them with clear water after your dive. Cutting tool. Can be worn on the belt of a harness, a vest strap or a computer strap thanks to the pouch provided. Comes with 1 pouch and spare blades.

The blades of the Eezycut are made of stainless steel. This steel offers a good resistance to humidity, but especially in sea water, the blades can rust! Do not hesitate to rinse them with clear water after your dive. Cutting tool. Can be worn on the belt of a harness, a vest strap or a computer strap thanks to the pouch provided. Comes with 1 pouch and spare blades.

The blades of the Eezycut are made of stainless steel. This steel offers a good resistance to humidity, but especially in sea water, the blades can rust! Do not hesitate to rinse them with clear water after your dive. Cutting tool. Can be worn on the belt of a harness, a vest strap or a computer strap thanks to the pouch provided. Comes with 1 pouch and spare blades.

Our 3mm hoods have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress.

Maximise thermal protection and dexterity with outstanding flexibility in this 3mm glove. Reshaped for 2021, the fit is improved with enhanced stretch across the back of the hand, whilst ensuring minimum water ingress thanks to fused seams. The longer length cuff can be trimmed to the wearer’s preferred length thanks to reinforced bar tacks in the wrist seams, allowing optimal comfort and performance.

Our 5mm hoods have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress.

Combining 4mm Kevlar reinforced fabric across the palm, fingertips and thumb, with 5mm stretch neoprene across the back of the hands. This produces a remarkably comfortable glove, perfected over several months with feedback from our team divers. Glued and blindstitched seams minimise water ingress and the Hydrolock wrist seal has a smoothskin interior, designed to eliminate flush. The kevlar fabric gives extra protection for activities such as net removal to prevent abrasion to the neoprene.

The most popular glove in our range has outstanding fit and excellent flexibility, thanks to the use of minimal prints on the back of the hand and an articulated print on the palm. The Hydrolock wrist seal almost eliminates water ingress, and fused seams ensure that a cold water dive does not have to mean freezing cold hands.

Micro holes in the top vent air and glideskin face seal for minimal water ingree. Collar is designed to work iwth drysuits fitted with warmneck.

Our 3mm, 5mm and 7mm hoods have a simple minimalist design and are produced using stretch neoprene to ensure a comfortable fit. The short collar works for both dry and wet suits, and micro holes in hood vent air with minimal water ingress.

Our warmest wet-glove has been redesigned to enhance fit and increase dexterity. With three fingers of each hand in a single compartment, the hands remain wamer as a result, whilst the index finger and thumb are free for manual operations. The flexibility of the back of the glove is maximised, reducing fatigue during a dive and a combination of a Hydrolock wrist seal with glued, blindstitched and fused seams ensures minimal water ingress.

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded out-sole make this ideal for regular shore diving and negotiating entry to the water especially over slippery rocks. Can also be used as rock boots with the Hydra drysuit.

With the classic construction of two layers of high insulation, low bulk fabric, the Arctic hat is seriously warm. Warm enough for Doug Allan on the BBC's Operation Iceberg.

With the classic construction of two layers of high insulation, low bulk fabric, the Arctic hat is seriously warm. Warm enough for Doug Allan on the BBC's Operation Iceberg.

The Arctic Legging features secure foot loops that hold it in place when the drysuit is put on. A high waistband minimizes the separation between the top and leggings. Tuck the top into the belt before putting on the drysuit. The lower legs are made up of a single layer to reduce bulk at the ankles, making them easier to put on.

The Arctic Legging features secure foot loops that hold it in place when the drysuit is put on. A high waistband minimizes the separation between the top and leggings. Tuck the top into the belt before putting on the drysuit. The lower legs are made up of a single layer to reduce bulk at the ankles, making them easier to put on.

Probably the world's best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by Fourth Element, the One Piece Arctic provides a simple solution to the challenges of thermal protection.

The Arctic's two layers of high insulation and low bulk fabric ensure exceptional levels of thermal protection.

Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer-fitting neoprene drysuits. In a layering system, the Arctic is also suited for use underneath membrane and trilaminate suits.

Using a combination of fastwicking, high insulation fabrics, the Arctic creates a micro-climate around the diver, keeping the body dry and warm. A high density inner fleece provides superior insulation, with maximum comfort and wicking, whilst the outer layer, which has a water-repellent finish, ensures a snug fit

Probably the world's best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by Fourth Element, the One Piece Arctic provides a simple solution to the challenges of thermal protection.

The Arctic Socks features secure foot loops that hold it in place when the drysuit is put on. A high waistband minimizes the separation between the top and leggings. Tuck the top into the belt before putting on the drysuit. The lower legs are made up of a single layer to reduce bulk at the ankles, making them easier to put on.

The Arctic Top features secure foot loops that hold it in place when the drysuit is put on. A high waistband minimizes the separation between the top and leggings. Tuck the top into the belt before putting on the drysuit. The lower legs are made up of a single layer to reduce bulk at the ankles, making them easier to put on.

The Arctic Top features secure foot loops that hold it in place when the drysuit is put on. A high waistband minimizes the separation between the top and leggings. Tuck the top into the belt before putting on the drysuit. The lower legs are made up of a single layer to reduce bulk at the ankles, making them easier to put on.

Suitable for diving or snorkelling, this fourth element snorkel includes a splash guard and soft silicone mouthpiece. To take anywhere your adventure takes you.

How to attach your snorkel to a fourth element mask strap

Once you have attached the strap to your mask, taking the second triglide clip on the strap, pull a small amount of the elastic strap through the buckle to create a little loop big enough to push your snorkel through and tighten to secure it in place.

The fourth element freediving snorkel is designed to float and fold away. Suitable for any freediving or snorkel adventure. From recreational to competitive freedive, the simplified design of this freedive snorkel means your kit is streamlined and low bulk.

For use under drygloves or wet mitts. 1.5mm hydrofoam provides the confidence that in case of dryglove failure they will retain and provide thermal protection.

Every adventurer needs a canteen of water. The Gulper is more than just your everyday water bottle though. Stainless steel double wall vacuum insulation means that iced drinks stay cool for up to 24 hours and a hot drink will stay that way for up to 12 hours. Every time you refill this bottle instead of buying bottled water (look out for refill stations cropping up everywhere) you are helping to reduce the production of plastic waste which may end up in landfill or our oceans. The versatile lid means you can drink on the go thanks to the twist and sip valve and the wide aperture makes filling and cleaning quick, simple and spill-free.

Every adventurer needs a canteen of water. The Gulper is more than just your everyday water bottle though. Stainless steel double wall vacuum insulation means that iced drinks stay cool for up to 24 hours and a hot drink will stay that way for up to 12 hours. Every time you refill this bottle instead of buying bottled water (look out for refill stations cropping up everywhere) you are helping to reduce the production of plastic waste which may end up in landfill or our oceans. The versatile lid means you can drink on the go thanks to the twist and sip valve and the wide aperture makes filling and cleaning quick, simple and spill-free.

With the classic construction of two layers of high insulation, low bulk fabric, the Arctic hat is seriously warm. Warm enough for Doug Allan on the BBC's Operation Iceberg.

Designed to be easy to don over the top of the Helios full suit, this shortie brings classic designs to new materials. The offset full length YKK zip makes donning and doffing the suit easy and stretch neoprene ensures a body hugging fit maximising the additional thermal protection for the body core. Easy to read size information is colour coded on the arm making suits easy to find on the rack if you are using for a dive school.

Waterproof outer with thermal inner lining provides excellent warmth.

What to wear when scuba diving?

Download our Layering Guide!

Getting your gear right can make or break a dive! We’re here to explain baselayers, undersuits, and what to wear for certain dive conditions, along with some hints and tips along the way.

The Hydro suit provides all over protection from UV and most ‘stingers’. Made with heavy grade high quality Lycra®, it has UPF of 50+ when dry, and over 30 when wet. It is the perfect dive skin for tropical waters, or for wearing under a wetsuit to ease donning and doffing.

The Hydro suit provides all over protection from UV and most ‘stingers’. Made with heavy grade high quality Lycra®, it has UPF of 50+ when dry, and over 30 when wet. It is the perfect dive skin for tropical waters, or for wearing under a wetsuit to ease donning and doffing.

The Arctic's two layers of high insulation and low bulk fabric ensure exceptional levels of thermal protection.

Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer-fitting neoprene drysuits. In a layering system, the Arctic is also suited for use underneath membrane and trilaminate suits.

Using a combination of fastwicking, high insulation fabrics, the Arctic creates a micro-climate around the diver, keeping the body dry and warm. A high density inner fleece provides superior insulation, with maximum comfort and wicking, whilst the outer layer, which has a water-repellent finish, ensures a snug fit.

The Arctic’s two layers of high insulation and low bulk fabric ensure exceptional levels of thermal protection.

Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer-fitting neoprene drysuits. In a layering system, the Arctic is also suited for use underneath membrane and trilaminate suits.

Using a combination of fastwicking, high insulation fabrics, the Arctic creates a micro-climate around the diver, keeping the body dry and warm. A high density inner fleece provides superior insulation, with maximum comfort and wicking, whilst the outer layer, which has a water-repellent finish, ensures a snug fit.

The Warmest dive wetsuit on the market

The Proteus II is the highest performing dive wetsuit on the market. Available in 3mm and 5mm, the Proteus II is often the benchmark to which other dive wetsuits are compared in terms of warmth. Our wetsuits are made using a greener and more eco-friendly limestone neoprene with Eco Carbon Black which uses scrap rubber tyres cutting C02 emissions by 200g per wetsuit. We also use water-base Aqua-X glues in lamination and construction of our neoprene suits meaning we’ve eliminated the use of harmful substances.

The Warmest dive wetsuit on the market

The Proteus II is the highest performing dive wetsuit on the market. Available in 3mm and 5mm, the Proteus II is often the benchmark to which other dive wetsuits are compared in terms of warmth. Our wetsuits are made using a greener and more eco-friendly limestone neoprene with Eco Carbon Black which uses scrap rubber tyres cutting C02 emissions by 200g per wetsuit. We also use water-base Aqua-X glues in lamination and construction of our neoprene suits meaning we’ve eliminated the use of harmful substances.

The Aquanaut freediving mask features a new design of silicone skirt which has been developed to fit as many face shapes as possible from a single design.

The low volume freediving mask, whilst compact in size, offers a surprisingly wide field of view, making this not just great for freediving, but a very capable all-purpose mask. It is fitted with a moulded silicone strap which is interchangeable with a fourth element 100% recycled mask strap (sold separately).

Zero plastic packaging

We set out to reduce and remove all plastic waste from all our masks. Instead of packaging our freediving mask in traditional hard plastic cases, we’ve opted for a zero plastic, low volume mask case.

The Aquanaut freediving mask features a new design of silicone skirt which has been developed to fit as many face shapes as possible from a single design.

The low volume freediving mask, whilst compact in size, offers a surprisingly wide field of view, making this not just great for freediving, but a very capable all-purpose mask. It is fitted with a moulded silicone strap which is interchangeable with a fourth element 100% recycled mask strap (sold separately).

Zero plastic packaging

We set out to reduce and remove all plastic waste from all our masks. Instead of packaging our freediving mask in traditional hard plastic cases, we’ve opted for a zero plastic, low volume mask case.

The Seeker mask was designed with two main objectives: maximise the diver’s field of vision to be as close as possible to the experience of not wearing a mask using a single lens and to fit everyone – well, nearly everyone. New facial geometry was combined with a soft silicone skirt to provide an outstanding and comfortable fit.

The low volume design allows easy equalisation and mask clearing as well as creating a visual experience which is wider and brighter than ever before – with a near natural field of vision.

The Seeker mask was designed with two main objectives: maximise the diver’s field of vision to be as close as possible to the experience of not wearing a mask using a single lens and to fit everyone – well, nearly everyone. New facial geometry was combined with a soft silicone skirt to provide an outstanding and comfortable fit.

The low volume design allows easy equalisation and mask clearing as well as creating a visual experience which is wider and brighter than ever before – with a near natural field of vision.

The fourth element mask strap has been made using 100% recycled materials; The elasticated strap is made using rubber and recycled nylon; the clips are made from recycled waste ABS (Acrylonitrile butadiene styrene) plastic from the automotive industry.

The clips have been designed so that they will fit most mask buckles, and will fit all fourth element masks.

How to attach your snorkel to a fourth element mask strap

Once you have attached the strap to your mask, taking the second triglide clip on the strap, pull a small amount of the elastic strap through the buckle to create a little loop big enough to push your snorkel through and tighten to secure it in place.