List of products by brand Carbonarm

Flexible arm for compact lamps, comprising handle, 10 joints and 25 mm ball joint. The arm is fitted with an internal safety cable. Marker line measurement is 1/2.

Flexible arm for compact lamps, consisting of handle, 15 joints and lamp holder, compatible with 1000 lumens light and similar. The arm is equipped with an internal safety cable. Marker line measurement is 1/2.

Flexible arm for compact lamps with handle, 15 joints and 25 mm ball joint. The arm is fitted with an internal safety cable. Marker line measurement is 1/2.

Aluminum Floating arm, complete with 2 anticorodal aluminum end joints, anodized to 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This arm compensates for the negativity of underwater lights, flashes and housings.

Aluminum Floating arm, complete with 2 anticorodal aluminum end joints, anodized to 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This arm compensates for the negativity of underwater lights, flashes and housings.

Carbon fiber arm with two 40-micron anodized anticorodal aluminum end joints (military standard) for maximum durability and excellent resistance to wear and seawater. This arm helps compensate for the water negativity of lights, flash and housings.

Carbon fiber arm complete with 2 ball joints in 40-micron anodized anticorodal aluminum (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This arm helps compensate for the water negativity of lights, flash and housings.

Carbon fiber arm with 2 anticorodal aluminum end joints, anodized to 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This arm helps compensate for the water negativity of lights, flash and housings.

This kit consists of 2 floating parts with 4 screws for Moby Support for PDV. Each part is made of high-density closed-cell polyurethane foam, incompressible down to -150 mt, and offers buoyancy of around 80 g (40g each).

This kit is required to neutralize the Moby's fixed support.

Floating ring made of high-density, closed-cell polyurethane foam, non-compressible down to -100 m and offering buoyancy of approx. 150 g. It has a Ø25 center hole to fit most of the arms available on the market.

Floating ring made of high-density, closed-cell polyurethane foam, non-compressible down to -100 m and offering buoyancy of approx. 150 g. It has a Ø25 center hole to fit most of the arms available on the market.

This kit includes 4 floating rings. Each ring is made of high-density, closed-cell polyurethane foam, non-compressible down to -250 m, and offers buoyancy of around 125 g. It has a Ø25 center hole to fit most of the arms available on the market.

This kit includes 4 floating rings. Each ring is made of high-density, closed-cell polyurethane foam, non-compressible down to -250 m, and offers buoyancy of around 125 g. It has a Ø25 center hole to fit most of the arms available on the market.

High-density float element, closed-cell polyurethane material.

Goodman 40-micron anodized anticorodal aluminum bracket compatible with GoPRO and compact camera cases, equipped with 2 SF / M6 balls for mounting lights, additional brackets and GoPro support.

Goodman handle in 40-micron anodized anticorodal aluminum. For GoPro cameras and digital camera housings.

Goodman handle. Made of anticorodal aluminum, anodized to 40 microns, for GoPro cameras and other digital camera housings, complete with 2 SF/M6 ball joints for mounting lights and other accessories.

Universal grip, with Multi-Ball Adapter, made of PVC and anticorodal aluminum, anodized with 40 microns (military standard) to ensure the maximum durability and excellent resistance to wear and to sea salt. This accessory can be easily adapted to different supports.

Universal handle in PVC and anticorodal aluminum anodized to 40 microns (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This accessory can be easily adapted to different supports.

Universal handle, with quick-coupling ball joint in PVC and 40-micron anodized anticorodal aluminum (military standard) to ensure maximum durability and excellent resistance to wear and seawater. This accessory can be easily adapted to different brackets. Easily remove your underwater lights/strobes for photos and videos.

Handle in PVC and anticorodal anodized aluminum, with single CP / 2A open clamp for quick adjustment of tripod head tilt and angle.

Universal handle in anticorodal PVC and aluminum, anodized to 40 microns (military standard), to ensure maximum durability and excellent resistance to wear and seawater. This accessory can be easily adapted to other supports.

Helmet for underwater caving. Compact, one-size-fits-all caving helmet.

It can be adjusted to any head size by means of internal PVC straps. It's very strong and light, and very compact in size. Numerous Carbonarm accessories can be applied to this helmet (e.g. clips, clamps, adapters) for easy use of lighting and action cameras. Thanks to internal PVC straps, all accessory fastening screws are not in contact with the head and do not get in the way during use.

Compact, one-size-fits-all caving helmet.

It can be adjusted to any head size by means of internal PVC straps. It's very strong and light, and very compact in size. Numerous Carbonarm accessories can be applied to this helmet (e.g. clips, clamps, adapters) for easy use of lighting and action cameras. Thanks to internal PVC straps, all accessory fastening screws are not in contact with the head and do not get in the way during use.

Sphere consisting of a 25 mm diameter SF/MC sphere and an M6 threaded flash contact plate, both in anticorodal aluminum and anodized with a 40 micron military treatment to guarantee maximum resistance to wear and salt over time. This sphere is very useful for attaching accessories directly to housings equipped with an active shoe mount.

GoPRO New Hero Black 13 case, 100% made in Italy.

Produced by Carbonarm and guaranteed to a depth of 250 meters. Large front window for the front display, allowing you to configure the GoPRO during your dive.

Anticordal aluminum housing for Ace Pro, the latest addition to the Insta360 series.

100% made in Italy, produced by Carbonarm, guaranteed down to -250 meters.

Positive features: double O-rings, firing pin and radial. Prepared for external battery, vacuum system, video output and remote control.

Double thread for M6 or 1/4 Kodak screws.

Aluminum Housing for the Insta360 X3, guaranteed up to -150 meters (Insta360 X3 not included in the price). Make Amazing 360° videos at 5.7k, or use it as an action cam, without ever losing what happens around you. You will be able to decide in post the most interesting shot, changing the scene in long take. We recommend using with Polecam, or with Moby Tray for DPV.

Neoprene cover to protect Insta360 X3 housing.

Neoprene porthole protection no longer enough for you? Choose Cover Strong for Insta360 X3 housings, and you'll have effective protection for your porthole against accidental knocks or drops.

Anticordal aluminum housing for DJI Osmo Action 3, 4 and 5. 100% Made in Italy, produced by Carbonarm, guaranteed down to -250 meters. Positive features: double O-rings, firing pin and radial. Prepared for external battery, vacuum system, video output and remote control. Double thread for M6 or 1/4 Kodak screws.

Universal housing and tray support, ideal for use with your underwater scooter (DPV).

Perfect for adding your underwater photography or video recording system to your scooter. The rotating base with quick-release system lets you prepare your entire photo or video recording setup, and position it on the scooter easily and securely.

Kit comprising 10 O-rings for 25mm diameter Carbonarm arms and ball joints.

Stainless steel 316 Kodak screw kit with Allen key (or Inbus key). This kit secures the Kodak screw housing to the Carbonarm hooks.

O-ring kit for Action Cam and Diveshot housing, includes user-replaceable O-ring.

Kit consisting of 2 arm straps. This Velcro kit is designed to transport your equipment (flash and flash units) in complete safety. With these straps, you can lock the arms in the transport position to prevent accidental shocks. Once in the water, they can be easily opened to allow normal use of the arms.

Single-arm flexible terminal, 1/2 marker line size. Also included are 2 pairs of 25 mm and 35 mm O-rings.

This accessory acts as a "rear-view mirror", positioning itself at the junction of the arms with a CP/3 triple clamp, allowing you to see what's behind you. The front part contains a 67mm threaded hole for additional lenses. The side consists of M8, Kodak and M6 threaded holes, enabling the placement of SF/M8, SF/WT and SF/M6 ball joints.

Quadruple Clamp. The Quadruple Clamp allows you to use different accessories, such as modeling lights, Go Pro, strobes, arms, etc.

Quadruple Clamp, open version. The open Quadruple Clamp allows the use of various accessories, such as modelling lights, GoPro, strobes, arms, etc. Opening the clamp allows the arms to be directed at different angles.

Quick-release male starter base with Kodak and M6 screws for arms, handles and PAR/SFL terminals

One piece for Flex Arms, size 1/2 marker line.

Stainless-steel hook with internal stainless-steel thread, covered by a plastic sheath. Guaranteed not to break.

Starting ball joint consisting of starting base and M6 ball joint. Made of anticorodal aluminum and anodized to 40 microns, it guarantees maximum durability and excellent resistance to wear and seawater. Version with second M6 threaded hole, for insertion of an M6 ball joint at 45°.

Starting ball joint consisting of starting base and M6 ball joint. Made of anticorodal aluminum and anodized to 40 microns, it guarantees maximum durability and excellent resistance to wear and seawater. Version with second M6 threaded hole, for insertion of a second M6 ball joint.

Starting bayonet with 2 M5 countersunk holes. Made from 40-micron anodized anticorodal aluminum (military standard) for maximum durability and excellent resistance to wear and seawater. M5 nuts included in the price.

The starting ball joint is composed of a base bayonet and an M6 ball joint in 40-micron anodized anticorodal aluminum (military standard), for maximum durability and excellent resistance to wear and seawater. This accessory can be easily adapted for use with a variety of different housings, and allows a complete arm kit, such as the Carbonarm kits, to be easily removed.

Starter ball with 45° bayonet base and 40-micron anodized anticorodal aluminum ball joint (military standard) for maximum durability and excellent resistance to wear and seawater. This accessory adapts easily to different brackets for different models of housings, and allows easy removal of complete arms such as Carbonarm kits.

Bayonet base with M6 internal threaded hole. Made from 40-micron anodized anticorodal aluminum (military standard), it guarantees maximum durability and excellent resistance to wear and seawater. This accessory can be easily adapted to different brackets for different box models.

Bayonet base with 2 M6 internal threaded holes. The base can be converted into a starting ball joint - or a 45° starting ball joint by inserting an M6 ball (SF / M6). By inserting 2 M6 balls, it's possible to have a double attachment. Made from 40-micron anodized anticorodal aluminum for maximum durability and excellent resistance to wear and seawater.

Starter ball composed of a bayonet base and a double M6 ball in anticorodal aluminum, anodized with a 40-micron military treatment to guarantee maximum resistance to wear and salinity over time.

Starting ball joint with Quick Release. It is also possible to place the starting ball joint on our housings. Loop not included.

Suction cup support with 25 mm Ball, which allows the positioning of cameras, action cams, Led Lamps or other accessories, on flat non-porous surfaces. Application handle that also allows easy removal.

Removable sunshield, including 4 nuts. Specially recommended for use with iPhone 6 / 6s / 7 and 8, as it eliminates reflection and sun spots on photos. Can be quickly removed while diving, for selfies and other videos.

Universal housing and tray support, ideal for use with your underwater scooter (DPV). Perfect for adding your underwater photography or video recording system to your scooter. The rotating base with quick-release system lets you prepare your entire photo or video recording setup, and position it on the scooter easily and securely.

Telescopic boat hook in anticorodal aluminum. This kit comes with 1 terminal ball joint (SF / M6) which allows micro-cameras, cameras, housings etc. to be attached via a single CP / 2 clamp (not supplied) for remote use from the boat.

Anticorodal Aluminum Block, with 4 M6 Threads to insert up to 4 SF / M6 Balls, to a Handle already equipped with IM / SF end ball. Included in the price is the stainless steel screw to be replaced in the Ball of the handle.

Anodized anticorodal aluminum bracket, with holes for mounting handles and housings. Particularly recommended for adding a handle to the Leo 3 Wi housing.

Anticorodal anodized aluminum bracket with holes for handle attachment and housing mounting. Particularly recommended for adding a handle to the Leo 3 Wi housing. The bracket comes complete with 1 IM / SF ball-joint handle for easy transport of equipment and support of arms or accessories.

Anticorodal anodized aluminum bracket with holes for mounting handles and housings. Particularly recommended for adding a handle to the Leo 3 Wi / Leo3 Smart or Diveshot housing. The bracket comes complete with 1 handle with quick-coupling ball joint for easy transport of equipment and support of arms or accessories.